Product ID:EUTECSOL 808 FLUX
MSDS Date:05/01/1986
FSC:3439
NIIN:00N036312
MSDS Number: BQLYC

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

NICKEL, MOLYBDENUM, COPPER & OTHER METALS LISTED IN

RTECS: 9999999ZZ

CARBON DIOXIDE. OZONE & NITROGEN OXIDES MAY BE FORMED

RTECS: 9999999ZZ

COMPOSITION & QTY OF FUMES & GASES TO WHICH WORKERS

RTECS: 9999999ZZ

HELMET IF WORN/IN WORKER'S BRTHG ZONE.

RTECS: 9999999ZZ

FILTER LENS. PROVIDE PROT SCREENS & FLASH GOGGS,

RTECS: 9999999ZZ

IS TOO DARK TO SEE THE WELD ZONE. THEN GO TO NEXT

RTECS: 9999999ZZ

THIS MAY INCL ARM PROTECTORS, APRONS,

RTECS: 9999999ZZ

METHANOL; (METHYL ALCOHOL)

CAS: 67-56-1

RTECS: PC1400000

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN ACID; (ROSIN)

CAS: 8050-09-7

DIMETHYLAMINE HYDROCHLORIDE

CAS: 506-59-2

RTECS: IQ0220000

WELDER'S HEAD W/RESPECT TO FUME PLUME, AS WELL AS

RTECS: 9999999ZZ

HYDROCARBON VAPS FROM CLEANSING & DEGREASING

RTECS: 9999999ZZ

PROD GEN ARE DIFF IN PERCENT & FORM FROM INGS. DECOMP

RTECS: 9999999ZZ

VOLATILIZATION, RXN/OXIDATION OF INGS, PLUS THOSE

RTECS: 9999999ZZ

FLUORIDES,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING MAY CREATE
ONE/MORE OF FOLLOWING HLTH HAZS. FUMES & GASES CAN BE DANGEROUS TO
YOUR HEALTH. CERTAIN MEDICAL STUDIES HAVE SUGGESTED THAT LUNG DMG
CAN RESULT FROM EXPOS TO WELDING FU MES & GASES. ACUTE:OVEREXP TO
WELDING FUMES MAY RESULT IN DISCOMFORT SUCH AS DIZZ, NAUSEA OR
DRYNESS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OR IRRITATION OF NOSE, THROAT OR EYES.
CHRONIC:OVEREXPOSURE MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN LUNGS)
& MAY AFFECT PULMONARY FUNCTIONS. ARC RAYS CAN INJURE EYES & BURN
SKIN. ELECTRIC SHO CK CAN KILL. ACGIH LIMIT FOR WELDING FUME IS 5
MG/M3.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL-VENTED AREA. CALL FOR MED AID. EMPLOY FIRST
AID TECHNIQUES RECOM BY AMERICAN RED CROSS. INGEST:CALL MD
IMMEDIATELY . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RE SP) . EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A
MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPKS & BRAZING FLAMES CAN
IGNITE COMBUSTS & FLAMMS. REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING & ALLIED PROCS.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS &
PRECAUTIONARY LBL ON PROD (SEE AMERICAN NATL STD Z49.1 "SAFETY IN
WELDING & CUTTING").
Other Precautions:TRAIN WORKER TO KEEP HIS HEAD OUT FUMES. TRAIN WORKER
NOT TO TOUCH LIVE ELECTRICAL PARTS & TO INSULATE HIMSELF FROM WORK
& GROUND.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENT DOES NOT KEEP EXPOS BELOW
RECOM EXPOS LIMIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT THE ARC, OR BOTH, TO
KEEP FUMES & GASES FROM WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHIELD W/ (ING 13)
Other Protective Equipment:WEAR HAND, HEAD & BODY PROT WHICH HELP TO
PVNT INJURY FROM RADIA, SPKS & ELEC SHOCK. SEE ANSI Z49.1. AT A
MIN, (ING 15)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:WELDED, PROCESS, PROCS & ELECTRODES USED. OTHER CNDTNS
WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES & GASES TO WHICH
WORKERS MAY BE EXPOSED INCL:COATINGS ON METAL BEING WELDED (SUCH
AS PAINT, PLATING/GALVANIZING), NUMBEROF WELDERS & VOL OF WORK
AREA, QUALITY & AMT OF VENT, POSITION OF (ING 4)

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (SUPP DATA)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOCA L REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.